Digital servo radiant heat thermal crib with integrated phototherapy Mod Tonalli 1 SD “PLUS” Cat. TEH-TSDPF TEHSA

Digital servo radiant heat thermal crib with integrated phototherapy Mod Tonalli 1 SD “PLUS” Cat. TEH-TSDPF TEHSA

Description:

Electromedical equipment with wheels, which allows manual control and servo control, the thermal environment of the patient in critical condition in an open environment for procedures. It has a heating element to provide a temperature no higher than 39ºC, radiant type, a regulator to stabilize the patient's temperature and maintain the selected heating temperature or power. Continuous monitoring of control parameters.

Control system:

• Professional control system based on a state-of-the-art microprocessor that allows high-precision operation and translates into maximum safety for patient care and extraordinary thermal performance for patients in critical condition.
• Control and programming system of operating parameters through easy-to-use interactive menus with only 3 buttons and with means to avoid involuntary changes in programming, module messages with signs and LED indicators as well as audible alarms and suppression of these with the menu button.
• Self-test or initial self-diagnosis of system functions when starting or turning on the equipment.

Parameter monitoring:

• Simultaneous digital display of all thermal parameters: selected patient temperature (control temperature), monitored skin temperature and measured peripheral temperature; Heater power on high-contrast 5” LCD screen, with 4 selectable character intensity options.
• Selected and monitored temperature of the thermal mattress. (Optional).
• It has a visual 20-segment digital bar heater power indicator (better quality than LEDs). Each segment is equivalent to 5% of the total heating percentage, which is 100%.
• Alert messages in Spanish with conventional signs on the control panel.
• Automatic cut-off control due to overtemperature.
• RS232 port.

Operation modes:

• MANUAL: With this mode the power of the heater is controlled in percentages that can range from 0% to 100%, depending on the time in which said preheating is desired.
• SKIN OR SERVO CONTROLLED: With this mode, the temperature of the newborn is automatically controlled through the skin sensor and the servo control of the equipment.

Thermometers:

• Reusable skin or skin sensor (disposable optional), high precision thermistor. Self evaluation 10 times per second.

Heating module:

• Heating element made up of a quartz electric resistance of maximum 500 W, high efficiency, with a heating capacity of 45 to 50 seconds and complete cooling in 15 seconds. coated with quartz and contained in a parabolic metal structure, non-deformable by heat.
• With automatic preheating that starts when the system is turned on.
• Heating module with 90° rotation to both sides for taking X-rays, so as not to interrupt the patient's heating.
• It has an examination light or lamp with an LED lighting system.

Operation data:

• Selection or control range in manual mode: 0 to 100% heater power.
• Selection or control range in skin mode: 34ºC to 38°C.
• Programmable range by the manufacturer of selection in skin mode: 34ºC to 38°C.
• Thermometer resolution: 0.1°C
• High temperature alarm: 39.0°C + – 0.1°C.
• Difference from the selected and monitored temperature range: + – 0.2°C

• Crib limited by 4 transparent acrylic panels or rails of 9mm 2 longitudinal, thick and 22 cm. height folding and beveled to avoid cuts. Rear panel with 2 cable glands or grommets.
• Hook for infusion, liquid holder, solution holder or IV pole.
• Infusion pump support.
• Radiolucent mattress base to allow X-rays to be taken
• Stainless steel plate on which various sizes of cassette or X-ray plate holder can be placed
• Radiolucent mattress, waterproof, hypoallergenic, prevents the formation of fungus
• Fixed or variable height support (the latter is optional)
• Continuous inclination system of 15º on both sides Trendelenburg and reverse Trendelenburg)

Base:

• Base of rolling equipment. 2 of 4 wheels with brakes.

Approximate dimensions:

• Height: 190 cm.
• Clear height from floor to heating element: 175 cm.
• Width: 75 cm.
• Length: 115 cm.
• Weight: 125 kg.

Electric specifications:

• Supply voltage: 120 V AC + – 10%.
• Maximum consumption power: 800 Watts.
• Power line frequency: 60 Hz.
• Current: 6,5 Amp.

Optional equipment accessories:

• Integrated phototherapy lamp based on blue LED light, with a wavelength that covers the range from 400 to 550 nm. Lifespan of 50,000 hrs. With protective phototherapy mask for the newborn.
• 12 hour electronic clock. For phototherapy treatment.
• Hour meter For phototherapy lamp life.
• Electric variable height adjustment system (with push-button hand control)
• Cabinet with drawers
• Tray for monitor and instruments
• Resuscitation system, air-activated suction (ventury type) and humidification consisting of: Oxygen inlet port for type “E” oxygen cylinder with regulator and flow manometer, support for oxygen cylinder, 1 humidifier, 1 nasal cannula, The system Suction includes the valve or spout to regulate the absorption force and 1 glass container or tank with metal baskets.
• Support for oxygen tank type E.
• Reusable manual resuscitator with neonatal mask, reservoir bag and oxygen extension
• Stopwatch for Apgar tests with programmable alarms. They can be programmed at 1,5 and 10 minutes, for evaluation.
• Servo controlled gel mattress (temperature selected and monitored sample)
• Additional built-in power outlet.
• Integrated infant scale to weigh the newborn. With digital weight display (Measuring range from 0.5 to 8 kg With resolution of 0.01 kg.
• Built-in electrical voltage regulator.
• Integrated neonatal multi-parametric vital signs monitor. With LCD screen display of ECG curves and plethystomy, with audible and visible alarms in alterations of: heart rate, respiratory rate, pulse oximetry.