Digital alcohol detector model FC300e with Cat printer. ALC-FC300e AlcoCheck

Digital alcohol detector model FC300e with Cat printer. ALC-FC300e AlcoCheck

Digital alcohol detector model FC300e with Cat printer. ALC-FC300e AlcoCheck

The AlcoCheck FC300e® is designed to measure the level of alcohol in human breath. The results obtained by this equipment are used in the diagnosis of alcohol poisoning.
The accuracy of the equipment has been established in reference to Blood Alcohol Concentration (BAC) of 0.008 and 0.032% BAC. Before taking a test, wait at least 15 minutes after the last alcoholic drink.
Only use the equipment in temperatures of 0 °C ~ 40 °C

Note: It is advisable to do a calibration after 500 tests have been carried out.

Technical Specifications:

Sensor: Electro-chemical combustion cells
Display range: 0-1.500 mg/L BrAC; (3.000% BAC, 0.300% BAC)
Accuracy: ±0.03 mg/(0.05%, 0.005%) at reference point
Memory: Record for 1000 tests
Heating time: 15 seconds
Test time: 10 seconds
Test repetition: Less than 60 seconds
Alarm sound: When exceeding the set point
Display: 4-digit LCD with backlight
Size: 106mm x 51mm x 19mm
Power supply: 9V alkaline battery or 12V DC adapter
Battery life: Approximately 500 tests
Operating temperature: 0°C ~ 50°C
Mouthpiece: Disposable with individual packaging
Size: 115x60x23 mm
Function: Passive and active
Memory download: To PC via USB-RS 232 cable
Printing of analyzed data: To PC via USB-RS232 cable
Pressure detection and blow interruption
Instructions for use:
If this is your first time using the AlcoCheck FC300e, install 1 9V battery in the unit.

Insert one of the nozzles into the corresponding hole.
Press and hold the “TEST” button and release it when the device turns on.
The display will show a numerical test before starting the countdown from 15 to 0.
Press the mouthpiece with your lips, and blow lightly continuously for approximately 6 seconds. You will hear two tones when the device has finished taking the breath sample. You will see the digit “C” move from left to right on the screen as the device analyzes the sample.
The results will be displayed for a period of approximately 30 seconds: Ex. Off 0.250.
If the sample is not valid, the screen will show “Error”: Ex. ERR.