Do you know the new alter K3 high-speed non-contact infrared thermometer, you can use it in the office, subway, supermarket. The passing rate per minute is greatly improved (3 people/min)
“You just bring your forehead approximately 5 centimeters apart to the thermometer sensor and it will take your body temperature.”
- Test time is faster (500 ms); The passing rate per minute is greatly improved
- High precision in temperature measurement, precision tolerance: +/- 0,2 degrees Celsius
- It can be connected to a USB power source, power bank, 18650 lithium battery (not included).
- Intelligent infrared forehead thermometer, no need to hold, can be hung/fixed with double-sided adhesive tape/bracket.
- It can be applied on different occasions. Office / Subway / Home / Supermarket / Store / Community / Entrance, etc.
Accuracy | +/- 0.2 degrees | Response time | 0.5 Seconds |
Abnormal automatic alarm | flashing + “Di Di” sound | Loading method | USB charging or battery (18650 Li-ion) |
Automatic measurement: | measuring distance 5cm~10cm | Home | USB DC 5V |
On hold: | about a week | Weight: | 350g |
Installation method: | nail hook, double-sided adhesive, bracket fixation | Size: | 170 * 115 * 140 mm |
Operating temperature | 10°C – 40°C (Recommended 15-35°C) | Infrared measurement range | 0-50 °C (77°F) |
On hold: | about a week | Display: | digital screen |
BOTTOM VIEW
TOP VIEW
FRONT VIEW
REAR VIEW
FUNCTIONING
Description of the Situation
Operation instruction
1. Standby: The red dot at the bottom of the screen lights up in turn. (Figure 1)
2. Insufficient power: The horizontal bar lights up in the center of the screen. (Figure 2)
3. Normal temperature: flashing green lights and “Di” alarm. if it is higher than 37.5 Degrees Celsius (Fig. 3)
4. Abnormal temperature: flashing red lights and “Di Di” alarm (Fig. 4)
5. Default:
“Lo”: ultra-low temperature alarm. (Fig.5)
“HI”: ultra high temperature alarm (Fig. 6)
OPERATION INSTRUCTION
Temperature measurement: Front of the thermometer and bring it within 5-10 cm. (Fig. 7)
Mode change: There is a small hole on the back of the device (Fig. 8). You can use a 3mm diameter screwdriver
to insert the hole and then press the button.
(1) Temperature unit: Press the mode switch' hole and then select 'C' or 'F' (Fig. 9, 10) C: Celsius F: Fahrenheit
(2) Mode: long press 3 seconds and select 'b' 'Fig 11, 12'
FOR SALE HERE AT PRO SALUD:
K3 DIGITAL INFRARED THERMOMETER WITH TRIPOD AND RECHARGEABLE BATTERY INCLUDED.