Basic infant incubator Pilli 1000 B Cat. TEH-PILLI1000-B TEHSA

Optional gadgets:

• Integrated phototherapy with timer and hour counter for phototherapy.

• Temperature not higher than 39°C. For newborns.

• Based on electronic technology.
• Self-test system when turning on the equipment
• Knob for control temperature adjustment.

• High temperature.

• Air or manual: Control of the temperature of the air that circulates inside the helmet.

• By means of a digital thermometer or electronic sensor to monitor the temperature of the air circulating inside the cap.
• Digital display of monitored temperature of the microenvironment inside the incubator.
• It has a visual indicator of the operation of the heater and the power line.

• By means of a 300 W electrical resistance, built into the control module and with access to the interior of the incubator to generate a pleasant microenvironment.

• High-resistance transparent acrylic cover (6 mm) with 4 iris or porthole type accesses, front door, entrance for scale, 4 accesses for tubes inside the chamber and opening lock.
• Double wall with air circulation between the cap and the double wall from the back to the front. (optional)
• 2 iris rings on the sides or ports to have access to the patient. (optional)

• Hypoallergenic, antistatic and resistant to temperatures above 40°C.
• System with the possibility of giving three positions:
• Horizontal.
• Trendelenburg.
• Contra Trendelenburg or reverse Trendelenburg.
• Radiolucent mattress base to facilitate taking X-rays.

• Metal structure cabinet.
• Brake system on 2 of its 4 wheels

• Dimensions and weight:
  • Height: 134 cm + – 1 cm.
  • Width: 56 cm + – 1 cm.
  • Length: 94 cm + – 1 cm.
  • Weight: 72 Kg. + – 1 Kg.

• Selection range in air mode: 28.0°C to 38.0°C
• Thermometer resolution: 0.1°C
• High temperature alarm: 39.0°C + – 0.5°C.

• Supply voltage:
  • 120 V ac + – 10%.
  • Maximum consumption power: 300 Watts.
  • Power line frequency: 60 Hz. Current: 2.5 Amp.