Neonatal Thermal Incubator with Door

FEATURES

• Servo-controlled by micro-computer;
• Enough operating windows can reduce disturbance to the baby during breastfeeding;
• Touch switch panel with digital LED display, set-temp, actual temp are displayed separately;
• Multiply self-check alarms with audible and visible; Heating power rate indicates 0-100%;
• The baby bed can be pulled out of the side door

TECHNICAL SPECIFICATIONS

• Power supply: AC220V, 50HZ
• Power input: 600VA
• Air temperature control range: 25℃~37℃
• Temperature change: ≤0.5 ℃
• Temperature uniformity: ≤0.8 ℃
• Temperature rising time: ≤45min
• Noise level: ≤55dB (A)

ALARMS

• Audible and visible alarm indication, and can indicate the actual temperature and cut off the power supply of the heater.
• Over temperature alarm: when control temperature ≤38 ℃;
• Deviation alarm: ±3℃;
• Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put in the wrong place;
• Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
• Power failure alarm: when there is no power or the power cord is disconnected.
• Alarm system: when there is a malfunction E2ROM inside the temperature controller.

PACKAGE

• Gross weight: 72Kg
• Net weight: 60Kg
• Measurement: 1085mm × 640mm × 1080mm